Data syncs every 5 minutes · checked Data updated How updates work

Firmware guide · Updated 2026-10-28

Recovery (.zip) vs Fastboot (.tgz): What Is the Difference?

Recovery and fastboot packages differ in file type, flashing tool, bootloader requirements, data retention and risk. This side-by-side comparison explains what each one is for, so you download the right file the first time.

The short answer

A recovery package is a .zip installed from the system updater or Recovery, and it normally keeps your data. A fastboot package is a .tgz written partition by partition with MiFlash or fastboot, and it wipes the device. Use recovery for routine updates and fastboot for rescues and downgrades.

The difference at a glance

ItemRecovery packageFastboot package
File extension .zip .tgz
Tool System updater or Recovery MiFlash or fastboot
Bootloader unlock Usually not required for official builds Required
User data Usually kept Wiped (clean all)
Best for Routine updates, minor fixes Rescues, downgrades, damaged partitions
Failure risk Low; the install aborts when verification fails Higher; an interruption can leave the phone unbootable

Installing a recovery package correctly

  1. Copy the .zip to the root of the phone storage or to the Download folder.
  2. Open Settings, go to About phone and tap the version number repeatedly to enable the manual package picker.
  3. Select the matching zip and wait for verification and installation. Do not power off during the process.
  4. The first boot afterwards can take longer than usual, which is expected.

When you must use fastboot

  • The phone cannot boot and Recovery is unusable
  • You need to downgrade across major versions, for example HyperOS 3.0 to 2.0
  • Recovery installs keep failing with partition verification errors
  • You want a full wipe to rule out software corruption

Two common mistakes

Renaming a fastboot package and installing it as a recovery zip. The archive layout does not match, so Recovery rejects it immediately.

Flashing a package from another region through Recovery. The installer verifies region and version, and a mismatch normally fails verification; forcing a cross-region fastboot package can break calls, NFC and OTA updates.

Questions about this guide

I only want to update the system. Which package do I download?

The recovery package (.zip). Pick it from the system updater and your data is normally kept, which makes it the lowest-risk option.

Can MiFlash flash without wiping data?

MiFlash offers a save user data mode, but it is not guaranteed across versions. For downgrades and rescues, use clean all to avoid leftover data causing problems.

Can a failed recovery install brick the phone?

Usually not. Verification stops the install before anything is written, and the system still boots. A power loss during installation can leave partitions incomplete, which then requires a fastboot flash.